| Approved fluids (other fluids on request) | ||
| Heating water (in accordance with VDI 2035) | • | |
| Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data must be checked) | • | |
| Permitted field of application | ||
| Temperature range at max. ambient temperature +40 °C |
-20 up to +130 (in short-term operation 2 h: +140) (for applications with Wilo-Protect-Module C: -20 to +110) °C |
|
| Maximum permissible operating pressure | Pmax |
6/10 bar |
| Pipe connections | ||
| Flange |
Combination flange PN6/10 (PN 16 flange according to EN 1092-2) |
|
| Nominal flange diameter |
DN 50 |
|
| Overall length | l0 |
280 mm |
| Motor/electronics | ||
| Emitted interference |
EN 61000-6-3 |
|
| Interference resistance |
EN 61000-6-2 |
|
| Protection class |
IP X4D |
|
| Insulation class |
H |
|
| Mains connection |
1~230 V, 50 Hz |
|
| Nominal motor power | P2 |
350 W |
| Speed | n |
2600 / 2800 rpm |
| Power consumption 1~230 V | P1 |
630 / 690 W |
| Current at 1~230V | I |
3.35 / 3.49 A |
| Capacitor |
16.0 µF / 400 VDB |
|
| Threaded cable connection | PG |
2x13.5 |
| Motor protection |
integrated |
|
| Materials | ||
| Pump housing |
Grey cast iron (EN-GJL-250) |
|
| Impeller |
Plastic (PP - 50% GF) |
|
| Pump shaft |
Stainless steel (X46Cr13) |
|
| Bearing |
Carbon, metal impregnated |
|
| Minimum suction head at suction port for avoiding cavitation at water pumping temperature | ||
| Minimum suction head at 50 / 95 / 110 / 130 °C |
3 / 10 / 16 / 29 m |
|
| Information for order placements | ||
| Make |
Wilo |
|
| Type |
TOP-S 50/7 |
|
| Art no. |
2080050 |
|
| Weight approx. | m |
16 kg |
• = available, ‐ = not available