TOP-S 30/10 (1~230 V, PN 10) | Data sheet

Pump curves Single-phase current

Dimension drawing

Terminal diagram

Mains connection, 1~230 V, 50 Hz

WSK = thermal winding contact

Full motor protection at all speed stages with optional tripping unit

SK 602N/SK 622N/Protect module C or other switchgear/control devices with WSK connection option

Triggering: External tripping at switchgear/control device

Reset: Automatic fault acknowledgement after cooling off of the motor

Automatic

Approved fluids (other fluids on request)
Heating water (in accordance with VDI 2035)		•
Water-glycol mixtures (max. 1:1; above 20% admixture, the pumping data must be checked)		•
Permitted field of application
Temperature range at max. ambient temperature +40 °C		-20 up to +130 (in short-term operation 2 h: +140) (for applications with Wilo-Protect-Module C: -20 to +110) °C
Maximum permissible operating pressure	P_max	10 bar
Pipe connections
Threaded pipe union		Rp 1¼
Thread		G 2
Overall length	l₀	180 mm
Motor/electronics
Emitted interference		EN 61000-6-3
Interference resistance		EN 61000-6-2
Protection class		IP X4D
Insulation class		H
Mains connection		1~230 V, 50 Hz
Nominal motor power	P₂	180 W
Speed	n	2400 / 2550 / 2700 rpm
Power consumption 1~230 V	P₁	335 / 385 / 390 W
Current at 1~230V	I	1.72 / 1.87 / 1.90 A
Capacitor		8.0 µF / 400 VDB
Threaded cable connection	PG	2x13.5
Motor protection		Optional SK 602N/622N tripping unit, Protect module C
Materials
Pump housing		Grey cast iron (EN-GJL-200)
Impeller		Plastic (PP - 50% GF)
Pump shaft		Stainless steel (X46Cr13)
Bearing		Carbon, metal impregnated
Minimum suction head at suction port for avoiding cavitation at water pumping temperature
Minimum suction head at 50 / 95 / 110 / 130 °C		0.5 / 5 / 11 / 24 m
Information for order placements
Make		Wilo
Type		TOP-S 30/10
Art no.		2066132
Weight approx.	m	6 kg

• = available, ‐ = not available