Close Please select at least one page for printing.

Wilo-VeroLine-IPL 50/115-0.75/2

Pump curves
2-pole, 50 Hz
Dimension drawing
Dimension drawing, flange
Terminal diagram

∆: Connection diagram delta connection

Y: Connection diagram star connection

Motor protection switch required on-site. Check the direction of rotation! To change the direction of rotation, exchange any two phases.

P2≤ 3 kW3~400 V Y
3~230 V ∆
P2≥ 4 kW3~690 V Y
3~400 V ∆

After removing the bridges, Y-∆ start is possible.

Approved fluids (other fluids on request)
Heating water (in accordance with VDI 2035)
Water-glycol mixtures (for 20-40 vol.% glycol and fluid temperature ≤ 40 °C)
Cooling and cold water
Heat transfer oil Special version at additional charge
Permitted field of application
Standard version for operating pressure pmax 10 bar
Special version for operating pressure pmax 16 bar
Temperature range at max. ambient temperature +40 °C -20...+120 °C (depending on the fluid)
Max. ambient temperature +40 °C
Installation in closed buildings
Outdoor installation Special version at additional charge
Pipe connections
Nominal flange diameter DN 50
Flanges PN 10 (PN 16 on request)
Flange with pressure-measurement connections R 1/8
Materials
Pump volute Cast Iron (EN-GJL-250)
Lantern Cast Iron (EN-GJL-250)
Impeller PPO-GF30
Impeller (special version)
Pump shaft 1.4021 [AISI420]
Mechanical seal AQEGG
Other mechanical seals On request
Electrical connection
Mains connection 3~400 V, 50 Hz
Nominal speed n 2900 rpm
Minimum Efficiency Index (MEI)
Minimum Efficiency Index (MEI) ≥ 0.10
Motor/electronics
Integrated full motor protection Special version with PTC thermistor sensor (KLF) at additional charge
Protection class IP 55
Insulation class F
Nominal current (approx.) IN 3~400 V 1.76 A
Motor efficiency ηm 50%m 75%m 100% 75.1/77.4/77.4 %
Power factor cos φ 0.78
Rated motor power P2 0.75 kW
Motor winding up to 3 kW 230 V Δ/400 V Y, 50 Hz
Motor winding from 4 kW 400 V Δ/690 V Y, 50 Hz
Installation options
Pipe installation (≤ 15 kW motor power)
Support-bracket mounting
Information for order placements
Weight approx. m 27 kg
Make Wilo
Type VeroLine-IPL 50/115-0.75/2
Art no. 2089593

Observe motor name plate data


Pioneering for You
VeroLine-IPL 25/70-0,12/2  VeroLine-IPL 25/80-0,12/2  VeroLine-IPL 25/85-0,18/2  VeroLine-IPL 25/90-0,25/2  VeroLine-IPL 30/70-0,12/2  VeroLine-IPL 30/80-0,12/2  VeroLine-IPL 30/85-0,18/2  VeroLine-IPL 30/90-0,25/2  VeroLine-IPL 32/90-0.37/2  VeroLine-IPL 32/100-0.55/2  VeroLine-IPL 32/110-0.25/4  VeroLine-IPL 32/110-0.75/2  VeroLine-IPL 32/130-1.1/2  VeroLine-IPL 32/160-0.25/4  VeroLine-IPL 32/160-1.1/2  VeroLine-IPL 32/165-3/2  VeroLine-IPL 32/175-4/2  VeroLine-IPL 40/70-0,12/2  VeroLine-IPL 40/80-0,09/4  VeroLine-IPL 40/90-0.37/2  VeroLine-IPL 40/110-0,12/4  VeroLine-IPL 40/115-0.55/2  VeroLine-IPL 40/120-1.5/2  VeroLine-IPL 40/130-0.25/4  VeroLine-IPL 40/130-2.2/2  VeroLine-IPL 40/150-3/2  VeroLine-IPL 40/160-0.37/4  VeroLine-IPL 40/160-4/2  VeroLine-IPL 40/165-4/2  VeroLine-IPL 40/175-5.5/2  VeroLine-IPL 40/195-7.5/2  VeroLine-IPL 50/110-0.25/4  VeroLine-IPL 50/115-0.75/2  VeroLine-IPL 50/120-0.25/4  VeroLine-IPL 50/120-1.5/2  VeroLine-IPL 50/130-0.37/4  VeroLine-IPL 50/130-2.2/2  VeroLine-IPL 50/140-3/2  VeroLine-IPL 50/150-4/2  VeroLine-IPL 50/155-4/2  VeroLine-IPL 50/160-0.55/4  VeroLine-IPL 50/165-5.5/2  VeroLine-IPL 50/175-5.5/2  VeroLine-IPL 50/175-7.5/2  VeroLine-IPL 50/185-7.5/2  VeroLine-IPL 65/110-0,25/4  VeroLine-IPL 65/110-2,2/2  VeroLine-IPL 65/115-1.5/2  VeroLine-IPL 65/120-0,37/4  VeroLine-IPL 65/120-3/2  VeroLine-IPL 65/130-0,55/4  VeroLine-IPL 65/130-4/2  VeroLine-IPL 65/145-5.5/2  VeroLine-IPL 65/150-0.75/4  VeroLine-IPL 65/155-5.5/2  VeroLine-IPL 65/155-7.5/2  VeroLine-IPL 65/165-5.5/2  VeroLine-IPL 65/175-5.5/2  VeroLine-IPL 65/175-7.5/2  VeroLine-IPL 80/105-3/2  VeroLine-IPL 80/110-4/2  VeroLine-IPL 80/115-2.2/2  VeroLine-IPL 80/120-0,55/4  VeroLine-IPL 80/120-4/2  VeroLine-IPL 80/125-0.75/4  VeroLine-IPL 80/140-1,1/4  VeroLine-IPL 80/145-5.5/2  VeroLine-IPL 80/155-7.5/2  VeroLine-IPL 100/135-1.1/4  VeroLine-IPL 100/145-1.5/4  VeroLine-IPL 100/165-2.2/4  VeroLine-IPL 100/175-3/4