VeroLine-IPL 32/130-1.1/2 | Data sheet

Wilo-VeroLine-IPL 32/130-1.1/2

Pump curves

2-pole, 50 Hz

Dimension drawing

Dimension drawing, flange

Terminal diagram

∆: Connection diagram delta connection

Y: Connection diagram star connection

Motor protection switch required on-site. Check the direction of rotation! To change the direction of rotation, exchange any two phases.

P₂≤ 3 kW	3~400 V Y
	3~230 V ∆
P₂≥ 4 kW	3~690 V Y
	3~400 V ∆

After removing the bridges, Y-∆ start is possible.

Approved fluids (other fluids on request)
Heating water (in accordance with VDI 2035)		•
Water-glycol mixtures (for 20-40 vol.% glycol and fluid temperature ≤ 40 °C)		•
Cooling and cold water		•
Heat transfer oil		Special version at additional charge
Permitted field of application
Standard version for operating pressure	p_max	10 bar
Special version for operating pressure	p_max	16 bar
Temperature range at max. ambient temperature +40 °C		-20...+120 °C (depending on the fluid)
Max. ambient temperature		+40 °C
Installation in closed buildings		•
Outdoor installation		Special version at additional charge
Pipe connections
Nominal flange diameter		DN 32
Flanges		PN 10 (PN 16 on request)
Flange with pressure-measurement connections		R ¹/₈
Materials
Pump volute		Cast Iron (EN-GJL-250)
Lantern		Cast Iron (EN-GJL-250)
Impeller		PPO-GF30
Impeller (special version)		–
Pump shaft		1.4021 [AISI420]
Mechanical seal		AQEGG
Other mechanical seals		On request
Electrical connection
Mains connection		3~400 V, 50 Hz
Nominal speed	n	2900 rpm
Minimum Efficiency Index (MEI)
Minimum Efficiency Index (MEI)		≥ 0.10
Motor/electronics
Integrated full motor protection		Special version with PTC thermistor sensor (KLF) at additional charge
Protection class		IP 55
Insulation class		F
Nominal current (approx.)	I_N3~400 V	2.55 A
Motor efficiency	η_{m 50%}/η_{m 75%}/η_{m 100%}	77.6/79.6/79.6 %
Power factor	cos φ	0.79
Rated motor power	P₂	1.1 kW
Motor winding up to 3 kW		230 V Δ/400 V Y, 50 Hz
Motor winding from 4 kW		400 V Δ/690 V Y, 50 Hz
Installation options
Pipe installation (≤ 15 kW motor power)		•
Support-bracket mounting		•
Information for order placements
Weight approx.	m	26 kg
Make		Wilo
Type		VeroLine-IPL 32/130-1.1/2
Art no.		2089580

Observe motor name plate data